Service · Sydney
Laminate benchtop repair in Sydney.
We repair burn marks, chips, scratches, lifting edges and water swelling in laminate and melamine benchtops on site across Sydney. We fill the damage, rebuild the edge and colour match the pattern so the repair blends in. The benchtop stays in the kitchen.
What we repair
Laminate benchtop repairs we do.
Burn marks
Hot pots, air fryers and irons scorch laminate. We cut out the burnt layer, fill it and re-finish the patch to match.
Chipped edges and corners
We rebuild the chip, square the edge and colour match the pattern.
Scratches and knife marks
Deep scratches are filled and blended. Light scratches are cut back and re-finished.
Lifting or bubbling laminate
We re-bond the laminate to the board where it has lifted and seal the edge.
Swollen edges from water
We cut back the swollen board, rebuild the edge and seal it against water.
Holes from old fittings
We fill old screw holes and cut-outs flush with the surface.
What we say no to
When a laminate benchtop needs replacing.
Some damage is not worth repairing, and we say so before you spend anything.
- Laminate that has lifted across most of the top. Re-laminating is a joinery job and we will say so.
- Board that is soaked through and crumbling along a long run. A small swollen edge we can rebuild. A rotten top we cannot.
- A colour or pattern that no longer exists on a very large repair. We can match most, but we tell you if the repair will show.
Repair or replace
| What changes | Repair with us | Replace |
|---|---|---|
| Time | One visit for most burns and chips | Measure, order, wait for delivery and refit |
| Mess | A small, covered work area | The old top out, the sink out, the plumber back |
| What you keep | The same top, cut-outs and splashback | A new top that may not match the cupboards |
See the difference
Laminate benchtop repairs: before and after.

Before

After
Chipped panel edge in a cupboard
The white panel edge had torn away where it meets the timber frame, back to raw board. We rebuilt the edge, re-profiled it and colour matched it into the surrounding white.

Before

After
Gouge on a cabinet face
A deep gouge in the middle of a flat white cabinet door. We filled it in stages, sanded it flush and colour matched it to the finish around it.

Before

After
Blown-out melamine in a locker
The white melamine on the underside of a locker top panel had broken away and the board core was showing. We filled it, sanded it flush and re-finished it so the inside reads as new.
How it works
How we repair a laminate benchtop.
01
Send us a photo
One clear photo of the damage and one from further back. That is usually all we need to quote it.
02
Get a fixed written quote
We send you a fixed price in writing within one business day. It is free and there are no hidden charges.
03
We book a time that suits you
We come to your home or site. On commercial jobs we can work after hours and on weekends.
04
We repair it on site
We fill, rebuild, sand and colour match the damage where it is. Most jobs are finished in one visit.
05
We check it and guarantee it
We inspect the repair in daylight, clean the area and guarantee the work.
On site
Laminate repair on the job.


Where we work
Laminate benchtop repairs across Sydney.
We come to you for laminate benchtop repair. We work across the Inner West, Eastern Suburbs, City of Sydney, Inner South, Lower North Shore, Ryde and Parramatta, and further for commercial jobs. See every area we service.
Who does the work
We train in-house, on real jobs, and we check every repair in daylight before we leave. Read how we work.
Questions about laminate benchtop repair
Laminate benchtop questions.
Can a burnt laminate benchtop be repaired?
Can you fix a chip on the edge of a laminate benchtop?
Can lifting laminate be glued back down?
Will the colour match?
Is it cheaper to repair or replace a laminate benchtop?
Laminate benchtop repair? Send us a photo.
We reply with a fixed written quote within one business day. Free, and we tell you if it cannot be repaired.
Next step
SEND US THE DAMAGE.
A clear photo is usually all we need. You get a fixed written quote within one business day.
Your request has been sent.
We have your details and the damage you described. We will come back to you with a fixed written quote within one business day.
If it is urgent, send the photo to us on WhatsApp and we will look at it sooner.
- Phone
- +61 415 882 644
- Send a photo on WhatsApp
- info@caobafrenchpolish.com.au
- Hours
- Quotes within one business day. After hours and weekends on commercial sites by arrangement.
- Where we work
- Sydney, NSW. See the areas we cover
- Response
- Fixed written quote within one business day