Our technician repairing a wall next to a lift control panel in a Sydney office lobby

Service · Sydney

Wall repair and making good in Sydney.

We repair walls on site across Sydney. We fill holes, knocks, dents and cracks in plaster and painted walls, make good around cut-outs and removed fittings, and colour match the paint so the patch does not show. We also repair rendered feature walls and timber wall panels.

Insured and WHS-compliantWork guaranteedFixed written quote in one business dayRepaired on site, no rip-outSydney based, part of Caoba Group

What we repair

Wall repairs and making good we do.

Holes and dents

Door handle holes, furniture knocks and picture hook holes, filled, sanded flush and painted to match.

Rough cut-outs and old fittings

Openings cut for switches, pipes and brackets, made good and blended into the wall.

Cracks

Hairline and settling cracks filled and finished so they stop showing.

Scuffs and marks

Scuffed corners and marked walls cut back and re-coated to match.

Rendered and textured feature walls

Chips in render and textured finishes rebuilt to match the pattern.

Timber wall panels

Scratched and chipped timber and veneer panels repaired and colour matched.

What we say no to

When a wall needs more than a repair.

Some damage is not worth repairing, and we say so before you spend anything.

  • Repainting whole rooms. We patch and blend. A painter does full walls.
  • Structural cracks that are moving or water damage that is still wet. The cause has to be fixed first.
  • Wallpaper. We do plaster, paint, render and timber.

Repair or replace

What changesRepair with usReplace
TimeMost patches are done in one visitA painter has to come back for the whole wall
ColourMatched on site to the paint on the wallA whole wall repainted to hide one patch
MessA small area, covered and cleanedFurniture moved and a room out of use

See the difference

Wall repairs: before and after.

Before: rough cut-out in a plaster wall with cabling exposed beside a switch plate

Before

After: rough cut-out in a plaster wall with cabling exposed beside a switch plate

After

Made good around a wall cut-out

A rough opening had been cut into the wall for a switch plate and the plaster was broken back around it. We made good around the fitting and blended it into the wall finish.

Before: chips knocked through the paint on a white wall panel

Before

After: chips knocked through the paint on a white wall panel

After

Chipped wall

Chips and knocks through the paint on a wall. We filled them, sanded them flush and colour matched them into the surrounding finish.

How it works

How we repair and make good walls.

01

Send us a photo

One clear photo of the damage and one from further back. That is usually all we need to quote it.

02

Get a fixed written quote

We send you a fixed price in writing within one business day. It is free and there are no hidden charges.

03

We book a time that suits you

We come to your home or site. On commercial jobs we can work after hours and on weekends.

04

We repair it on site

We fill, rebuild, sand and colour match the damage where it is. Most jobs are finished in one visit.

05

We check it and guarantee it

We inspect the repair in daylight, clean the area and guarantee the work.

On site

Wall repair on the job.

Close up of our technician filling a wall beside a lift panel
Close up of our technician filling a wall beside a lift panel
Our technician repairing a wall edge next to a black door frame with masking tape in place
Our technician repairing a wall edge next to a black door frame with masking tape in place

Where we work

Wall repairs across Sydney.

We come to you for wall repair and making good. We work across the Inner West, Eastern Suburbs, City of Sydney, Inner South, Lower North Shore, Ryde and Parramatta, and further for commercial jobs. See every area we service.

Who does the work

We train in-house, on real jobs, and we check every repair in daylight before we leave. Read how we work.

Questions about wall repair and making good

Wall repair questions.

Can a hole in a plaster wall be repaired without repainting the whole wall?

Yes. We fill the hole, sand it flush and paint the patch with a colour we mix on site to match the wall. We blend the edges so the patch does not leave a visible square. On most walls the repair is very hard to find.

Do you repair walls in apartments before an inspection?

Yes. Picture hook holes, scuffs, dents behind doors and marks from furniture are the main things a final inspection picks up. We repair them in one visit before you hand the keys back. Tell us the inspection date and we will book around it.

Can you make good around cut-outs on a building site?

Yes. Builders call us to make good around switches, pipes and brackets after other trades have been through. We rebuild the plaster or the panel around the fitting and blend it into the finish. We work to the defect list and can work after hours.

Can you repair a rendered or textured wall?

Yes. We rebuild the chip or hole and copy the texture of the wall around it, then colour match the finish. Render and textured finishes take more time than flat paint, and we say that in the quote.

Wall repair and making good? Send us a photo.

We reply with a fixed written quote within one business day. Free, and we tell you if it cannot be repaired.

Next step

SEND US THE DAMAGE.

A clear photo is usually all we need. You get a fixed written quote within one business day.

Free. No obligation.

We use your details only to answer your enquiry. See our privacy policy.

Phone
+61 415 882 644
WhatsApp
Send a photo on WhatsApp
Email
info@caobafrenchpolish.com.au
Hours
Quotes within one business day. After hours and weekends on commercial sites by arrangement.
Where we work
Sydney, NSW. See the areas we cover
Response
Fixed written quote within one business day
Call us